5

5 Comments

  1. Olga MANUNINA, Moscow Region

    Planning last winter a new corner in the garden, I decided to build a path there that would connect a hidden barbecue area with a ceremonial rosary.
    The idea arose by itself: the path must smoothly coil between fruit trees, skirting the summer gazebo and hiding behind a bend. For work used improvised materials left after construction: planed board thickness of 25 mm and ordinary brick masonry. First, with a bayonet shovel outlined the contours, selecting the width of the track in 60 cm.
    I took out a small layer of earth from the outlined zone, building a loose "bed". To protect the path from weeds and premature rotting of the tree, the bottom is covered with geotextile. Sliced ​​it with a margin of 5 cm on each edge. Then she began laying the curb: she put the brick on the rib tightly to each other, and let the edges of the geotextile out under it.

    For the flooring cut slabs of length 60 cm, treated them with antiseptic (protection from decay) and dried. Spreading them smooth turns of the track was not so easy. Formed gaps filled with small gravel, so that the canvas was uniform and convenient for walking. Over time, the boards and crushed stone fell more densely, the ground was tamped well, and on the sides of the path rose flower beds.

    dorojka-svoimi-rukami

    Reply
  2. Valentina SAMUSEVA

    Plant beds with vegetables are dangerous to spill from weeds with potent solutions. But on the tracks they are simply irreplaceable. I checked several options in the case. Everything works, the main thing is to work on a sunny morning.

    Seams between tiles can be spilled with a solution of salt (2 tbsp per 1 L of water).

    Most plants die when watering them with boiling water. But it is more reliable: I boil 1 l of water, I add 2 st.l. salt, 10 st.l. 9% vinegar and immediately pour between the tiles - through 2-3 days weeds end, and there is not yet a minimum of 2 weeks.

    The moss between the tiles is best served by a solution of table vinegar (1: 1 with water).

    And from the weeds, and from the ants, a solution of borax (300 g per 10 L of water) is effective.

    Most of all, we have overgrown the wrong track. Therefore, it was dismantled, a layer of turf was removed, sanded, covered with dense polyethylene, and the tiles were laid again. Now - order!

    Reply
  3. Tatyana Kravchenko

    This year I made an unusual path to the summer soul. Next to the shower, we have a well, so it's always damp, and dirt stuck to the shoes, and now it's just wonderful!
    To make such a path, you need to collect quite a few plastic bottles. Then they need to be cleaned of labels. After that, the bottom of the bottle is cut off (somewhere at 5 cm), we pour the soil into an improvised glass and turn it upside down. It is desirable that during the arrangement of the track the ground is wet, then it will be easier to compact the plastic elements.

    In this way, you can create tracks anywhere on the site. At the end of the work, you must actively trample, so that everything is properly laid back and strengthened. That's all. Simple and beautiful.
    Do not be afraid to fantasize and do not like everyone else! From this you get both pleasure and benefit.

    dorojka-iz-plastikovyh-butylok

    Reply
  4. Alla Narkovich

    I could not pass by the autumn past the fruit of the chestnuts and fill them with supplies. DRIED, THEY ARE THE BEAUTIFUL MATERIAL FOR THE MANUFACTURE OF THE CHILD MASSAGE TRACK.
    It was necessary: ​​chestnuts screwdriver thick synthetic thread long needle with a big eye
    Prepare
    With a screwdriver in each chestnut drilled two perpendicular perpendicular holes.
    Stringing
    In the first chestnut I introduced a needle and fixed it with a loop. Then strung chestnuts on a string, introducing a needle only in
    one of the through holes of each chestnut. The length of the thread corresponds to the length of the future track. The last chestnut fastened like the first. Total produced 8 of such threads.
    Weaving
    On the floor, she spread out chestnut strips parallel to each other. A needle with threaded thread connected the blanks into a single cloth (see diagram). Secured the thread behind the last chestnut. The massage path is ready.

    dorojka-svoimirukami

    Reply
    • "Do it yourself"

      Walking on a massage mat is a useful wellness procedure. It not only relieves fatigue, but also stimulates the entire body, thanks to an active action on the nerve endings of the feet, directly connected with all the main organs. A great alternative to expensive and not always quality services are massagers made by themselves. Walking on an orthopedic mat has no contraindications. This allows them to use them without restrictions to adults and, most importantly, children from the day they stand up.

      Reply

Leave a Reply

Your email address Will not be published.