Useful tools for giving your own hands - the collection of 1
Contents ✓
Useful adaptations and ideas to facilitate work in the garden and on the site
Garden seats with their own hands
In total, I made three seats - two of them as a gift.
I send a snapshot of the gift, because the seat, at the suggestion of my friend, bought a box for gloves and light tools.
The latter require a cleaner and less humid place.
The seat has a hinged lid, magnetic lock and soft foam padding. All materials of secondary use, except for PVA glue and screws for fastening. The current question is: how to protect the seat bottom from wet soil? To do this, he covered the bottom with a thin aluminum sheet (from the billboard). From the sides of the seat, I fixed hard plastic handles directly into the holes in 10 mm thick chip plywood.
The pens stick out like a pot, the hands of a sitting gardener are easily found to be moved to a new place when planting, for example, onion and garlic, or when weeding a narrow row. Last fall, I first planted five onions, especially not straining my back.
Buy such a seat is impossible! You can only make. Dear men, make a gift to your spouse and good acquaintances. By the way, the weight of the seat I got 4,7 kg.
Boris Georgievich Bessonov.
See also: Adaptations for beds with own hands
Garden figures-supports for climbing plants
To make climbing plants easier to cling tendrils or just to reach up, we help them: put poles, frames, trellises, nets, stretch marks. You can add to them volumetric figures - the lady and the bullfighter.
To do this, you need a board and a piece of plywood. We dissolve them on trims with a section of 25 × 25 mm and rings with a section of 7x70 mm. For the first figure, we connect some ends of the planks, and others, having spread out, we stick into the ground.
On the formed tripod we throw rings. They will automatically take their place (Figure 1, photo 1).
For the bullfighter, we attach the rings to the cross bars and connect the rings together with two cords, which are pulled to the ground by pegs (Fig. 2, photo 2).
Valeria Dobrovolsky
See also: Device for self-magnetizing water by hand (diagram)
Protection for the pump in the well
I have a well. In the intense heat, the flow of water decreases.
In order not to burn the vibro pump, I applied protection. When the water level is above the contacts, the relay is turned on, as the current flows through the water.
When the level is lower, the relay turns off.
Contact P breaks the pump supply circuit.
For special information, you can add light and sound alarms.
Yu.A. Tolstolutskiy
TOOLS FOR MASTERS AND MASTERS, AND HOME GOODS ARE VERY CHEAP. FREE SHIPPING. THERE ARE REVIEWS.
Below other entries on the topic "How to make your own hands - a householder!"
- DIY yard scoop from a canister
- Do-it-yourself suspended wood splitter
- DIY paper towel holder
- Wheelbarrow-sneguberschik own hands (photo + design drawings)
- Smoothly bend plywood - do-it-yourself parallel cuts and fittings for them
- DIY sanding drum from a tin can
- Guide ruler for cutting plywood - drawing
- Do-it-yourself carriage for sharpening chisels (microchisels) on wood
- Template device for making large arcs and arches - drawing
- An interesting way to form currants and props for her with her own hands - photos and diagrams
Subscribe to updates in our groups and share.
Let's be friends!
#
FLOWER SUPPORTS FROM WHEELS
If you have lost their bicycle wheels at home, I advise you not to rush them to the dump. They are great for the construction of supports for berry bushes and perennial flowers.
Remove the knitting needles and the rim, fasten around the bush on three driven in pegs, and even better - on pieces of reinforcement or thick wire, tying it at the right height. Untie in the fall and lower them to the ground. Everything is very simple and practical!