Sticking non-woven wallpaper of different colors to change the design - master class
Contents ✓
Flizeline wallpaper - different glue, change direction and select patterns
In this material, we demonstrate how you can decorate the walls with fleece wallpaper of various colors. We chose floral motifs and uneven stripes of discreet shades, which effectively look on a light background.
The series is supplemented by solid wallpaper of white, light gray and marsh color with light structures. If you like to experiment, transform your house with patterns and monophonic canvases. In this case, the wallpaper does not need to be glued only vertically.
You will need
• steel line • rubber roller • brush as an alternative to the roller • bucket for diluting the adhesive • wallpaper brush as an alternative to the rubber roller • wallpaper scissors • angular or paint brush • wallpaper knife • pencil • adhesive for non-woven wallpaper • glue roller • knife with wide blade (for cutting) • agitator • roller for rolling joints for paper wallpaper (left) and for structural wallpaper • plumb bob • folding meter • wallpaper trowel
Create a romantic atmosphere in the bedroom
Delicate flowers along the width of the head of the bed are framed by panels with stripes in the tone of orange, brown and marsh color. To create a harmonious ensemble, the colors of the tables are repeated with white and brown shades of wallpaper.
1. First, dissolve the glue (for example, Metylan) and allow it to swell.
2. Measure the height of the room and add the allowance 4-5 on the cutting. See the length of the panels on the table.
3. Before cutting, the cloth of the wallpaper should be bent, pressed and cut with a knife.
4. From the corner of the room with a folding meter, measure the width of the first panel minus 1 cm (52 cm) for uneven walls, see photo 13.
5. Using a plumb line and a pencil draw a vertical.
6. Apply glue paint first to the corners.
7. Then apply glue roller on the surface of the panel.
8. Along the marking, glue the first panel on the wall.
9. Rubber roller to press the panel to the wall - from the middle to the edges.
10. A large wallpaper spatula will serve as an excellent guide to straighten a surplus wallpaper with a wallpaper knife.
11. Then glue the next piece of the butt, ie, directly to the edge of the previous panel.
12. Press the edges with the roller for rolling the joints.
13. In the inner corner with an uneven wall, bend the wallpaper to the width of 1 cm. Cut the edge several times with scissors across.
14. The next panel to paste exactly into the inner corner, that is, with a slight overlap on the previous panel.
15. Remove surplus along the edge with a spatula.
See also: Wallpapers for painting: the pros and cons
How to bypass the wall outlet with wallpaper?
1. Before you glue the wallpaper around the outlets and switches, you must turn off the electricity. Apply glue around the switches with a corner brush.
2. Cut the wallpaper crosswise and cut the hole in the shape of the switch.
3. Excess wallpaper at the door frame, press the wallpaper spatula and cut with a wallpaper knife.
4. Excess wallpaper at the slope of the window opening gently trim at the edge.
How to bypass the radiator when sticking the wallpaper?
1. In narrow spaces, such as the niches of radiators, apply glue with a small roller for the radiator.
2. Cut out the size of the wallpaper behind the radiator.
3. Rolling a dry roller behind the radiator.
INTERNAL AND EXTERNAL ANGLES
It is better not to glue the corners, otherwise cavities are formed, and the wallpaper is peeled off. If necessary, follow the rules:
- coarse-fibred wallpaper (1 and 2) should be bent to a width of not more than 2 cm
- non-woven wallpaper (3 and 4) stick directly to the inside and outside corners
- when you paste wallpaper with a pattern (5 and 6), you need to take into account the rapport, the last panel width is cut to the corner, the next panel is cut according to the pattern.
See also: Liquid wallpapers with own hands
Change the direction of the wallpaper
1. Determine the desired height and note the horizontal position of the panel.
2. Apply glue on the wall, glue the twisted sheet on the markings and press it.
Z. Where the wallpaper is skirting the angle, it is necessary to ensure that the adjacent panel continues the pattern.
4. The lower panel should be pasted on and pressed with a roller for rolling joints.
5. Using a spatula, press the protruding edges and cut with a knife.
6. On the top of the wall, apply glue and paste a horizontal white cloth.
How to glue non-woven wallpaper - video
TOOLS FOR MASTERS AND MASTERS, AND HOME GOODS ARE VERY CHEAP. FREE SHIPPING. THERE ARE REVIEWS.
Below other entries on the topic "How to make your own hands - a householder!"
- Walls from aerated concrete with own hands (photo of building)
- Structuring the walls with your own hands for posting
- DIY wall decor and painting - photos, options and ideas
- Decorative acrylic plaster for wall finishing: methods and photos with examples of application
- Lightweight partitions with your own hands - materials and structures, purpose
- Simulation of corner brickwork with their own hands
- Plastering the outer corner with your own hands
- How to glue liquid wallpaper with your hands (photo)
- Partitions in the attic with their own hands - photo and instruction
- Trompley in the apartment - how to create the effect of illusion
Subscribe to updates in our groups and share.
Let's be friends!