Processing water-damaged wooden structures is my “folk” way
THAN TO PROTECT COULD AND OTHER WOODEN CONSTRUCTIONS (rain, flood, etc.)
The author of the article proposes the technology of preserving wooden details of summer cottages, especially roof slabs exposed after partial damage to the dampness caused by putrefaction caused by loss of airtight insulation of roofing.
It is known that water grinds the stone, and not wooden structures, protected from moisture, especially the crowns of foundations, roof beams of various structures, can collapse within one or two seasons.
The reason for this is the intensive coating of the outer surfaces of wooden products and their deep mass with mold fungus and rotting. And this, in turn, leads to deformation of defective units and details of structures, which may lead to their collapse in the future.
An impending disaster with the timely detection of negative and dangerous phenomena can be prevented with the help of available tools and techniques that do not require expensive antiseptic and protective coatings.
First of all, it is necessary to eliminate the cause of moistening of wooden products.
Then the detected lesions, such as, for example, in the photo 1 and 4, are carefully cleaned with the available scrapers, a cycle or chisels. Significant in terms of area and depth, the affected areas are cleaned with wire brush brushes (photo 2) installed in the tool holder (electric drill or cordless screwdriver).
Stripped to a firm condition, the damaged area should be further processed with sandpaper and dried by hot air jet (from 50 to 500 °) fed through the profile nozzle of the construction hair dryer within 15 minutes, depending on the programmed temperature set on the hair dryer (photo 3). High temperature destroys deep foci in an array of wooden products.
On brushed or "fried" surfaces with a brush or foam rubber are applied abundantly and consistently, several layers after each drying out, used automotive mineral oils, called in use by "working off".
My technology is time-tested.
See also: How to Dry a Tree in a Microwave
PROTECTION OF A TREE FROM MOISTURE (DRYING AND PROCESSING) - FOLK METHOD: PHOTO
© Author: Viktor A. SHAROV. Vologda
TOOLS FOR MASTERS AND MASTERS, AND HOME GOODS ARE VERY CHEAP. FREE SHIPPING. THERE ARE REVIEWS.
Below other entries on the topic "How to make your own hands - a householder!"
- Do-it-yourself restoration and decoration of old watches - 2 options
- Dehumidification by own hands
- Sledge with his own hands made of wood (photo)
- Wicker trellis instead of a fence in the dacha with their own hands
- Rest area and a hexagonal roof with your own hands (+ Drawings)
- How to Pollinate Fruity Fruit Trees in the Garden
- DIY homemade watering system - my description and reviews
- How to grow pineapple at home
- How to make a moss bonsai with your own hands
- Porch with a visor with your own hands
Subscribe to updates in our groups and share.
Let's be friends!