Drawings of the bath for a “light steam” - a scientific approach
EASY COUPLE IN THE BATH - HOW TO GET IT? ADVICE AND DRAWINGS
The expression "with light steam" is associated with our wish for good and good health. Is it a coincidence? Of course not! After all, being in the steam room, a person under the influence of steam is literally transformed (if not to say - rejuvenated).
But why do we mean that this pair should be easy? So, is there a hard one too? Yes, that's the whole point. And the quality of the steam just depends on what the steamer gets after visiting the bath: pleasure and benefit or discomfort and painful condition.
Without going into complicated calculations for heat engineering, we'll talk in plain language and find out what is what. So, the quality of the steam depends on its humidity and temperature. Heavy steam has a low temperature and high humidity. Take, for example, the situation when in the steam room 50 ° at 70-100% of humidity. These parameters correspond to the "dew point" state.
In this case, the vapor molecules condense in the nasopharynx of a person, turning into drops of water, and, then falling into the lungs, can provoke suffocation.
The appearance of heavy steam can be caused by a very high temperature at low humidity (for example, 90 ° at 19-20%). In this case, a person in a steam bath has serious chances of getting a burn of the upper respiratory tract.
Light steam is good for health and also depends on the combination of temperature and humidity. The most optimal are the following "modes":
• t = 60 °,
humidity - 45-76%; B
t = 70 °,
humidity - 32-53%;
t = 80 °,
humidity - 22-24%.
To get light steam I propose to fulfill the following conditions.
Choose the optimal size of the steam room. Let's say for two or three people a room of 2 × 2,5 m is enough (with a ceiling height of 2 m, which in total is 10 m3).
Choose the optimum capacity of the stove-fireplace at the rate of 1 kW at 1m3 the volume of the steam room (in our case we need at least 10 kW). For those who are particularly interested in summer residents, I give below a drawing of a stove-heater, which is not inferior to factory analogues and is three times cheaper (1).
Correctly perform the thermal insulation of the walls and ceiling of the steam room (scheme 2).
Equip ventilation according to the laws of physics and common sense (scheme 3).
Approach the process of "making" a light couple with all responsibility. In this regard, I recommend that you do the following.
Protect the oven to 320 ° (the temperature can be measured with a thermo-pencil or infrared thermometer), then pour the steam by splashing a certain amount of water in accordance with this steam room volume (in this case, that is, at 10 m3, this will be approximately 0,82 l). Repeating the "sacrifice", we get the pairs of necessary parameters. Enjoy Your Bath!
See also: Barrel bath - design and drawing
BATHROOM DRAWINGS FOR HEALTHY BATH
© Author: DEMOKRIT EROFEEV, city of Kondopoga. Karelia
TOOLS FOR MASTERS AND MASTERS, AND HOME GOODS ARE VERY CHEAP. FREE SHIPPING. THERE ARE REVIEWS..
Below other entries on the topic "How to make your own hands - a householder!"
- An example of repairing a sauna (sauna) with their own hands - stages and photos
- Replacing a wooden threshold in a bathhouse with your own hands
- DIY boiler for a bathhouse - drawing
- How we built the bathhouse of our dreams - share experiences and ideas
- DIY bath for ages - drawing
- Thermal insulation and waterproofing of sauna (bath) SPA plates - photo and work progress
- How I built a bath - stages from the plan to the first furnace
- Decor of a bath ladle and mugs with their own hands
- Do-it-yourself bath - a step-by-step description from a process engineer - which and what is better?
- How to conduct and provide a bath with your own hands. Submission and discharge of water from the bath.
Subscribe to updates in our groups and share.
Let's be friends!