DIY greenhouse greenhouse - drawings (by ARCHITECT)
Contents ✓
HOW TO MAKE A GREENHOUSE FROM A POLYCARBONATE ACROSS THEIR DRAWINGS
In the continuation of the previous article - a story about how easy and simple do your own beautiful greenhouse from the fact that a long time ago was lying around in the corners.
The idea of a greenhouse originated with my wife a long time ago. Gradually accumulated solid information about various types, mainly from metal profiles.
And I wanted to use the material that had settled down in attics and in sheds over the years - logs, plywood panels, pieces of tin, etc. The beginning was laid by a jigsaw presented to me by my children for my birthday - my old dream.
Shields made of excellent 10 mm plywood, which were once the sophisticated design of a combined wardrobe-bed of a grandson, who had now matured to a beard, mustache, and a doctor's diploma, after proper sawing with a jigsaw, planted on the frame elements.
Dry logs from the roof of our five-wall, recently converted from hip to dvukhskatnuyu, went to the bottom harness.
The visor from polycarbonate in front of the entrance to the house suggested what the roof of the greenhouse would be made of.
Having made the necessary drawings and layout of the foam on the scale of 1: 10, which for the architect with the 30-year experience was not difficult, set to work.
Having marked plywood by pattern, with a jigsaw, arched rib elements and with the help of an electric drill and self-tapping screws mounted 14 frame edges.
Having painted them with nitro enamel from all sides, I dried them well. With the first snowdrops I cleared a pre-prepared site and dug the required number of holes for the foundations.
Together with the son-in-law, we manually made several batches of concrete and poured columnar foundations. When the concrete was strong enough, the trimming logs were laid, anchoring them to the foundations and holding them well together in the corners. Everything was ready to install the curved edges of the frame.
First, the extreme ribs were set, pairing them with a ridge beam and a harness, and then all the rest. After checking their verticality, they pinned an inclined crate along the bottom of the ribs for longitudinal rigidity, and then a horizontal crate of 2 × 4 cm bars.
Making the roof of pre-cut polycarbonate sheets cut along the length of the slope was a trick. After the fertile vegetative soil was delivered, the turnkey-ready construction was handed over to the picky hostess.
She also had by this time harvested seedlings of tomatoes, peppers of different varieties and tobacco to scare the whitefly.
Two years have passed. The greenhouse regularly supplies us with ecologically clean products, and last fall we prepared it for the third season.
Reference by topic: How to lower the temperature in a polycarbonate greenhouse
GREENHOUSE POLYCARBONATE OWN HANDS - DRAWINGS
GREENHOUSE FROM POLYCARBONATE OWN HANDS - VIDEO SUPER!
GREENHOUSES OWN HANDS - TIPS AND HAND-MAKED DESIGNS FROM READERS
GREENHOUSE FOR THREE SEASONS WITH OWN HANDS
In our region, the summer is very short. To seedlings had time to grow and give a good harvest, we need a greenhouse. I bought the finished design and installed in the garden. But due to the spring frosts, the seedlings landed late. Last year, I added a greenhouse with soil heating and ventilation, and now I open the planting season much earlier.
Preparation and assembly
Around the perimeter of the greenhouse, I dug a pit with a depth of 100 cm and filled the strip foundation. He divided the site in length into three parts - two at the edges for the beds and a path in the middle. Outside, the foundation was covered with sheet expanded polystyrene (“Pen-plex” 20 mm thick).
From plastic sewer pipes under future beds and under the walkway, installed air ducts (photo 1)
By the way
Underground pipe walls are colder than warm air flowing through. Because of this, condensate (water droplets) forms, which flows to the bottom of the pipes. To use this water as drip irrigation, we drilled holes evenly over the entire length of the canal bottom.
To separate the borders of the beds from the path, the grinder cut the slate into small shields and secured them in the ground (photo 2) along the lines.
He assembled a framework on the concrete and welded its base to the embedded metal elements of the foundation, additionally strengthened the construction with longitudinal and transverse braces (photo 3), covered it with polycarbonate (photo 4). In the collected greenhouse set a barrel with water for watering.
From flexible aluminum sleeves mounted air ducts. At one end I attached them to the pipes protruding above the ground, and at the second they fixed fans (photo 5) on 220 V (16 W 185.m.cub / hour). The latter suck in the warm air of the greenhouse into the pipes under the beds, thereby ventilating it and warming up the soil, after which the stream leaves through the opposite protruding end of the plastic channel.
I have fans working around the clock throughout the summer. To connect them to the wall of the greenhouse, I fixed the junction box (see photo 5) and led the wire from it to the house with a fork. Also installed in the greenhouse lighting and thermostat.
Practice has shown
As soon as the seedlings reach the desired size, drawers, cups and boxes, put in low plastic containers and transfer to the greenhouse. Spring days are usually sunny and there is a lot of light in the greenhouse. For the night inside the boxes with the seedlings we cover with blankets and leave the 60 W incandescent bulb on - it radiates heat and an optimal microclimate is formed in the greenhouse.
Within several days, seedlings are gaining strength - and it can be planted in open, heated soil. This refinement allows you to use the greenhouse, starting in early spring and ending in late autumn.
After the end of the season and harvest, we plant greens on the vacant place - dill, lettuce, onions. We grow flowers next to edible plants. Among other things, a strong floral scent reduces the number of insect pests.
© Author: Sergey Romanov, Mokhovaya village, Perm region. Photo by the author.
© Author: Anatoly Karamyshev Ryazan
TOOLS FOR MASTERS AND MASTERS, AND HOME GOODS ARE VERY CHEAP. FREE SHIPPING. THERE ARE REVIEWS.
Below other entries on the topic "How to make your own hands - a householder!"
- How to prolong fruiting vegetables in the greenhouse?
- Do-it-yourself greenhouse for cucumbers and tomatoes (stretch tape) - step by step photo and description
- DIY crafts for the garden from propylene PVC pipes
- Tracks in the greenhouse with their own hands from improvised materials (packages and rags)
- Greenhouse with airing on both sides with his own hands + DRAWING (Moscow)
- The greenhouse on the foundation of hemp with their own hands
- The original design of the greenhouse do it yourself (+ DRAWING)
- General cleaning in the greenhouse: 5 stages of what you need to do in the fall
- Early harvest in a heated greenhouse - warming up the earth
- DIY greenhouse - drawing
Subscribe to updates in our groups and share.
Let's be friends!