DIY picnic garden table - workshop
Contents ✓
CONVENIENT GARDEN TABLE FROM WOOD OWN HANDS
A low garden table is an invention that is difficult to overestimate. We will tell how to make this piece of garden furniture more convenient.
A familiar summer resident asked me to make an unusual table for her. She wanted to use them comfortably, sitting on a rug or in a lounge chair, and a bottle with a drink and wine glasses to be fixed. It was important to ensure the convenience of storing the table in the shed after the dacha season.
STANDARDS
The most convenient way to make a countertop of floorboards. It is easier to work with grooved boards, inserting them into each other. The seams are practically invisible, especially if the boards are of high quality. But the floorboard is thick, so I stopped at the imitation of the beam. It will imitate the timber from the reverse side, and the side I need will be smooth and solid. In the near market I bought two three-meter boards with a width of 15 cm and a thickness of 2.5 cm and sawed them into six meter blanks. Well missed grooves with PVA wood glue. pulled off the countertop using clamps and waited a couple of days until the glue dries. It turned out almost square billet, which must be turned into a round.
I drew a circle with a diameter of 90 on the canvas. To do this, I took a rail about 50 in length. From one end I screwed the screw through, releasing the sting on 1 cm. The screw slightly drove into the center of the square and easily drew a circle. I saw the part with a jigsaw.
See also: Garden table with your own hands in folklore style
HOLE FOR FIXING SITES
On three sides of the countertop, I cut holes for wine glasses. First, stepping back from the edge of 7 cm, I drilled a hole with a diameter of 3 cm with a special nozzle on a screwdriver and then, using a jigsaw, brought a track a little wider than the thickness of the glass leg. This fixation eliminates the possibility of pushing the dishes or pouring a drink. From above, the hole can be folded up with a round file - so the cup of the glass will lie denser and will not hang out.
Made a hole for the bottle. It should be located in the "nest" slightly tilted and abut the bottom of the leg table. The diameter of the hole is designed for a bottle of champagne.
LEGS
The legs of the table are made of wooden bar 4 thick, see. They are foldable, like a marching stool. They are processed in the same way as the countertop. Fastened with door hinges. For an emphasis in a working condition we establish a clamp.
As a clamp, you can use the door hooks and window bolt. The height of the table, I chose 30, see. The table turned out comfortable and nice.
DISCOVER THE BEAUTY OF INVENTION
The next step is to decorate the surface of the table. Using a metal brush nozzle and an angle grinder, we clean the soft layers of wood both from the working surface of the table and from the end face in a circle. Sand the surface lightly with sandpaper.
For staining, I chose a spirit-based mahogany stain. When the tabletop is dry, process the surface with a grinding machine. The inner layer of wood remained dark, to the outer layer we returned its natural color.
Protect the table from rain and sun. The main defender of outdoor furniture is oil with the addition of beeswax. I chose colorless. It is desirable to cover the tree with oil in two layers with a break of 24 hours. Then you need to let it dry for a couple of days.
See also: Garden table from flower pots by own hands: master class
GARDEN TABLES OWN HANDS - IDEAS AND CONSTRUCTIONS
CABLE REEL TABLE OWN HANDS
Builders worked near the site and left a wooden coil from the cable. Took it for myself and over the weekend made an original table for the terrace.
On the one hand, I marked the coil circle and cut the excess along the lines with a jigsaw. The result is a supporting cross-leg (photo 1).
Turned the coil upside down. I polished the plane of the circle (tabletop) with sandpaper in several stages - I started with a large one and finished with a fine sandpaper. He wiped the tabletop with a rag and covered it with colorless varnish on wood in two layers (photo 2).
Additionally, I decided to decorate the tabletop with a pattern. When the coating was dry, I pasted masking tape and painted a branch with birds on it. Then he carefully cut out the pattern along the contour with a clerical knife, removed the tape inside the pattern and applied black paint over the resulting stencil (photo 3). After drying, I removed the remaining tape.
I painted the supporting cross in black, and wrapped the stand tightly with a twine rope, gluing each turn with a thermal gun (photo 4)
© Author: Ilya Samoilov, p. Momotov, Voronezh region Photo by the author
GARDEN TABLE OWN HANDS - VIDEO
© Author: Alexey Vladimirov
TOOLS FOR MASTERS AND MASTERS, AND HOME GOODS ARE VERY CHEAP. FREE SHIPPING. THERE ARE REVIEWS.
Below other entries on the topic "How to make your own hands - a householder!"
- How to make furniture sustainable - tips
- Folding bed with own hands (photo)
- How to make a homemade stepladder chair
- How to remove scratches on furniture with your own hands - three ways
- What if the drawers get stuck, it's hard to push
- Beds with scarfs with their own hands
- Fitting the legs of swinging furniture with your own hands
- Do-it-yourself wooden shelving for the kitchen or basement + DRAWING
- Provencal corner do it yourself - master class (photo)
- A rack in the technique of crafting with your own hands (+ photo)
Subscribe to updates in our groups and share.
Let's be friends!