DIY electric glass for apples
Contents ✓
ELECTRIC GRATER FOR APPLES OWN HANDS
READ THE ARTICLE "APPLES WILL NOT LOSE." The AUTHOR TELLS HOW FROM MATERIAL MATERIALS HAS MADE ELECTRIC TURN FOR APPLES. IN CONTINUING THE TOPIC I OFFER A Slightly SIMPLIFIED METHOD FOR MAKING A SIMILAR UNIT.
Production of electroter
An electric motor from an old washing machine was mounted on the edge of a small bench using screws and a sheet of tin (photo 1).
From stainless steel sheet cut two identical blanks in the form of trapezoid. Edged each file. In one workpiece, stepping back from the top about 15 cm, drilled a hole with a diameter slightly larger than the diameter of the motor shaft. He screwed the finished part with nuts to the motor (photo 2) with the top down.
I made a cylinder from a bar with a cross section of 10x 10 cm and a length of 10 cm and fixed a grater made of stainless steel strip with self-tapping screws. The finished drum is fixed on the motor shaft. To do this, I drilled a hole of the required diameter in the center of the cylinder, greased it with two-component epoxy glue and strung the part on the shaft. Using slats with a width of 10 cm, I screwed the second stainless steel trapezoid with screws (photo 3)
To make the device convenient to use, I supplemented the engine with a switch. First, I connected a start-up relay (photo 4) to the motor wires, then I connected a wire with a plug through a conventional switch (photo 5).
Application for chopping apples
For apples, I core and cut them into four parts. I connect the electric grater to the network and start the engine. I throw the slices into the casing and press them against the rotating cylinder with a wooden block. The crushed product crumbles into a container placed below.
See also: Dryer for vegetables and fruits with own hands on electric heaters
ELECTRIC GRINDER FOR APPLES OWN HANDS - PHOTO
ELECTRIC TERK FOR APPLES - VIDEO (ANOTHER OPTION)
© Author: Alexander Makarenko, Orsha. Photo of Nikolay Golovachev
TOOLS FOR MASTERS AND MASTERS, AND HOME GOODS ARE VERY CHEAP. FREE SHIPPING. THERE ARE REVIEWS..
Below other entries on the topic "How to make your own hands - a householder!"
- How to insert usb 3 and a decoder into an old radio tape recorder - diagrams
- Change lighting to LED - pluses and minuses
- What kind of lamps for lighting seedlings to choose
- How to repair a headlamp with your own hands (+ diagram)
- Redesign of the computer power supply unit with own hands
- LEDs - connection, views and savings
- How to amplify the WIFI signal in an apartment and a large house?
- DIY lamp - photo and DIAGRAM
- DIY headphone repair - repairing a bow
- Protection for a three-phase motor by hand (diagram)
Subscribe to updates in our groups and share.
Let's be friends!