ПОЛЕЗНЫЕ СОВЕТЫ, ХИТРОСТИ И ИДЕИ ДЛЯ НАЧИНАЮЩЕГО СТОЛЯРА ПОДСТАВКА При приготовлении различных растворов, лакокрасочных составов приходится компоненты смешивать, фильтровать и переливать. А все знают, что при выполнении таких ответственных работ одна рука должна быть свободной. Именно это обеспечивает подставка, согнутая из стальной проволоки 6 мм. В кольце подставки можно разместить фильтрующим элемент, свернутый воронкой. ШУРУП …
With my own hands - read more ... Useful tips and life hacks for a carpenter: both for a master and a beginner (tricks and secrets) - collection 23USEFUL TIPS, TRICKS AND IDEAS FOR THE BEGINNER WOMAN CENTER LINE In most cases, drawing a center line along the part is not a problem. The problem is to quickly divide the part in half and draw the center line exactly in the middle. The problem can be solved simply. Using a combination square, you need to draw two lines at an angle of 45° (Fig. 1). The point of their intersection is the middle of the part. Axial...
With my own hands - read more ... Useful tips and life hacks for a carpenter: both for a master and a beginner (tricks and secrets) - collection 22USEFUL TIPS, TRICKS AND IDEAS FOR THE BEGINNER CARWORKER DRAWING LAMP ON THE WORKBENCH This idea - to make a mount for a lamp - came up when I needed convenient local lighting for cleaning a small part. In addition, the lamp fits well on a workbench, the lid of which has holes for stops. In a block measuring 20x50x100 mm, drill at a distance of several centimeters...
With my own hands - read more ... Useful tips and life hacks for a carpenter: both for a master and a beginner (tricks and secrets) - collection 21USEFUL TIPS, TRICKS AND IDEAS FOR A BEGINNER CARWORKER ADJUSTING THE LIVER When making boxes, caskets and other items for similar purposes, any craftsman always wants to make the lid so that it fits perfectly to the body. The easiest way to achieve this is to first assemble and glue all the parts, making a box, and then setting the offset of the saw blade a little more...
With my own hands - read more ... Useful tips and life hacks for a carpenter: both for a master and a beginner (tricks and secrets) - collection 20USEFUL TIPS, TRICKS AND IDEAS FOR THE BEGINNER JOINTER JOINTING WITH A SMOOTH JOINT I don't have a jointer, so when adjusting the side edges of the boards for gluing the board into a smooth joint, I use a circular saw with a new sharp rip saw blade. Using a circular saw, I cut through the joint of two boards laid close to each other (Fig. 1). At the same time, even...
With my own hands - read more ... Useful tips and life hacks for a carpenter: both for a master and a beginner (tricks and secrets) - collection 19