ROLLER WITH A “HAIRSTYLE” FOR YOUR HANDS DECOR Here’s a simple idea for upgrading a roller that will turn the process of painting walls into an exciting activity, and you will definitely be satisfied with the result. To do this you will need tape and a clipper. The roller must be covered with tape so that there is a gap of approximately 10-12 mm wide between the strips. And these lines need to be formed...
With my own hands - read more ... Paint roller for textured, decorative painting with your own handsHOW TO MAKE A KEY FOR A GRINDER? I lost the key to the grinder, which I use to unscrew the locking nut that secures the disc. There is nowhere to buy a new one at the dacha, and the nut has become so tight over time that it was impossible to remove it using any available means. I was smart and easily changed the disk, and a new universal key appeared in my tool arsenal. I took an adjustable wrench and a little...
With my own hands - read more ... DIY “horned” key for an angle grinderGRINDING CYLINDER FROM A CAN WITH YOUR HANDS Sometimes in my free time I make knives, and recently from a friend I received a good knife made of very strong steel, which is very difficult to grind and sharpen by hand. I thought for a long time about how to simplify grinding and sharpening, while saving time and effort. I found the easiest way. Without a grinder and not manually. For solutions …
With my own hands - read more ... DIY sanding drum from a tin canWOODEN BOARD FOR NOTES WITH YOUR HANDS Having rummaged through my supplies of materials, I found a 1200x2400 mm fiberboard sheet, quite suitable for the base of the board. You can use other materials as long as they are easy to stick pins into. For the frame of the board, I took scraps of tongue-and-groove lining boards. I sawed off the frame parts to length, sawed off the ends and...
With my own hands - read more ... DIY note boardDIY WALL STAND FOR TOOLS AND CONSUMABLES In addition to tools (screwdrivers, pliers, hammers and chisels), you can place other items on this spacious stand. For example, small drawers for storing bolts, screws, nails and other fasteners, as well as jars of paint and glue. All holders, shelves and drawers are attached to the stand using L-shaped...
With my own hands - read more ... Do-it-yourself perforated panel for tools in the workshop + drawings